| Customization: | Available |
|---|---|
| Type: | Wrinkle Remover Equipment |
| Theory: | Laser |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Instruction:
BS-FCL4V is a high energy CO2 fractional laser resurfacing system based on ablative CO2 laser technology. Skin resurfacing lasers briefly direct an intense burst of laser energy onto the surface of the skin, vapors skin tissues and water very quickly. It penetrates depth is about 1mm, and leaving the skin's surface intact, creating tiny columns of treated or coagulated tissue which are surrounded by the healthy tissue. Nearby the damaged cell immediately move into this microscopically damaged area and heal the wounded area, thus collagens regrows and skin is rejuvenated.
BS-FCL4V is widely used for different applications in plastic or dermatological surgery, aesthetics purpose as skin resurfacing, and also vaginal tightening with the dedicate handpiece. The scanner can be programmed through the user-friendly LCD screen, and the 7-joint articulated arm greatly facilitates the operators.
Features:
- High quality TEM00 sealed off CO2 laser generator
- 7 joint articulated arm with high energy transfer ratio
- Tiny spot size down to 0.1mm in diameter
- Programmable scanning shape and scanning mode
- Support customized settings
- Support random, midsplit and linear scanning mode
- Support 360 degree or focus treatment for vaginal tightening
| Laser Source | CO2 laser with fractional scanning mechanism |
| Spectra Wavelength | 10600nm |
| Energy To Tissue | 0 to 30 Watts (optionally 40W ) |
| Pulse Energy | 0 to 100 Watts |
| Laser Mode | Fractional (scanning) Vaginal Tightening Pulse/CW |
| Light Delivery | 7 Joints articulated arm |
| Control panel | 8.1 Inch full size colorful touch screen |
| Scanning Spot Density | 1 - 10000 |
| Treatment Size | 20 x 20 mm (adjustable) to 3 x 3 mm |
| Spot Diameter | 0.10 mm or more |
| Spot Distance | 0.10 mm to 2mm |
| Pulse Width | 100us to 10ms adjustable |
| Pulse Delay | 10ms to 1000ms |
| Condenser Focus | F=70mm |
| Scanning Shape | Square, Rectangle, Circle, Polygon |
| Weight | 58Kg |
| Working Environment | 10 - 28ºC 30~80%RH,500~1060hPa |
| Power Specification | AC220V/50Hz, 10A |
HOW THE CO2 LASER WORKS ?
Your plastic surgeon or dermatologist defines the amount of energy to be transmitted to the skin's surface by the laser beam and at the same time control the depth of penetration.
The CO2 laser system can be used in several ways: "focused" for cutting your skin without bleeding, "defocused" for superficially removing your skin, and "ultra pulsed" for your facial resurfacing. When the CO2 laser is delivering powerful, rapid pulses, your doctor is able to resurface your skin for cosmetic improvement.
WHICH part of skin can be used by the CO2 ?
The CO2 laser is known to be used to treat wrinkles, blotchiness or age spots, and scars from acne or other causes. It can be used on the entire face or specific areas. Certain other characteristics of your skin, such as its thickness and texture, may influence whether you are a good candidate for laser resurfacing. Some patients may benefit from the laser's mild "tightening" effect on the skin, particularly in the lower eyelid area where the skin often becomes some loose as a result of aging.
){kind=link}