| Customization: | Available |
|---|---|
| Directions: | European and American Skin |
| Application: | Salon, Home |
|
Still deciding? Get samples of US$ 298/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Skin images are taken under more than 5 different spectrums back light, including RGB white light (simulate sun light in noon time), UV light with 365nm wavelength which is important to observe derma skin layer issues, UV light with 405nm wavelength, which is required to find more invisible skin issues on epidermis layer (as acne, skin inflammation, etc), cross polarized light, parallel polarized light. With AI technology enabled software, the skin images are deeply analyzed, and redness, sun spots and mixed pigments issues are specially displayed with contouring marks. Totally 8 images will be displayed after analysis by BS-3800 machine.
|
pectrum
|
U.V.-A of a wavelength of 315-400nm
|
|
Fluoresce Tubes
|
10 Watts + 6 Watts, lifecycle > 3000 hours
|
|
Magnifier Rate
|
2x
|
|
Power Consumption
|
< 60 Watts
|
|
Power Specification
|
AC220V/50Hz or AC110V/60Hz
|
|
Working environment
|
Ambient temperature: -20°C~40°C
Relative Humidity: ≤80% Atmospheric pressure: 500-1060hpa |
|
Weight
|
8.6Kg
|
|
Dimension
|
39cm x 31cm x 52cm
|
In total, the machine has 4 large bulbs (10 watts each) and 2 small ones (6 watts each) strategically placed to reveal the various conditions of the skin. Inside the machine is also a magnifying mirror that allows the customer to see herself/himself with the various florescent colors of various skin conditions. The Skin Care Consultant (you) will look at the customer from the other side of the machine through a movable magnified viewing panel .
The Machine can detect following disorders
1) Pigmentation problems
2) Sun Damage below the skin
3) Dehydrated skin
4) Congestion/Acne
5) Oily skin6)Dead skin
7) Poor Circulation
8) Dry Areas
9) Localized Congestion
10 High Coverage and Make-up
11 Bleached Hair
12 Good circulation and Hydration (Ideal skin)
|
Working Principle
|
A breakthrough in skin analyzerthe BS-102 will allow the client and esthetician to recognize and diagnose skin problems together.
The BS-102 employs a long-wave ultraviolet light that causes problem areas on the skin to be illuminated as different colors. This device has been used in the medical field for countless years to aid in the diagnosis of skin disorders and is safe for the skin and eyes. With this visual representation of where the problem areas are or may occur, the esthetician can easier communicate to the client the benefits of proper skin treatment and care. |
|
Feature
|
1) Easy operation.
2) Does not require a darkroom. 3)2 X's magnifying glass allows for complete illumination and observation of the clients face. 4) Internal exhaust fan allows for continuous use. |
|
Operation Method
|
1)Place the machine on a table or cart that is at eye level.
2)Lift up the skirted door all the way to the top and turn on the machine. 3) be sure the skin is clean and place the clients head under the skirt. Be sure the skirt covers the entire clients head down to the shoulders. The skirt allows the MD-F102 to be used without a darkroom. Be sure to adjust the mirror to the proper angle. 4) be sure to examine the client's entire face and keep a detailed record to insure proper treatment. Refer to the color chart for analysis. 5) Turn on the machine and test begin. 6)the cosmetologist can see the client's face via view window. And contrast the clients's skin color with the card as I show you in the attachment. cosmetologist will analyse the clients skin problem. 7)Turn off unit after use. When not in use be sure to tuck the skirt into the machine. |
Related product ( BS-3800)
The new 3D whole facial analysis function is used to display the contouring of face, quite useful when using the analysis result to display how skin/face contouring changes in certain time frame, and software will also give comparison of different segments of skin changes, as moisture/pigments/wrinkles, etc. By the mirror contrast function, operator and client can observe how skin changes in detail; roll over the face image in different direction just like in a virtual 3D environment.
| Spectrums | 5+3 spectrums |
| Analysis Images | 8 Images with 3D view of whole face |
| Camera | Built-in 20 million pixel camera |
| Lens | Optical glass with 7 lens |
| Focus Type | AF optimized for facial area |
| AI Assisted Feature | Record AF for each client |
| Resolution | 1920P |
| Sensor | CCD 1/2.3 Inch |
| Weight | 12Kg |
| Dimension | 543x422x400mm |
| Power | 110V-240V, 50/60Hz, Max 40W |
In depth understanding of the skin's physiology and function is essential for proper skin analysis.
CLASS DESCRIPTION: Learn how to recognize numerous skin conditions, know treatment contraindications and how to take the right approach to achieve optimum results. You will learn about Acne, Rosacea, Hyperpigmentation, Menopause-challenged skin and other treatment room challenges. Having an in-depth review of skin physiology and ingredient performance will greatly improve your understanding and confidence level. Lecture and demonstrations help you to integrate and increase your knowledge base to gain insights and build confidence This is not a product specific class.
Q: Delivery time?
A: Commonly 3-5 business days. If during public holiday it will be extended.
Q: Warranty period?
A: We provide 12 months warranty, and flexible warranty extension policies. Please consult with our people for details.
Q: What kind of payment term is accepted?
A: We support bank wire transfer to our company's account.Paypal or Western Union is also acceptable.
Q: Do you combine shipping?
A: We will combine when possible and discount shipping when possible per your request.
Q: How about packing?
A: Commonly packed in carton. Optional aluminum handcase is another solution.
Please send an inquiry to zoe
Sincery International Limited / Lumsail Industrial Inc. (Factory)
Website:lumsail.en.made-in-china.com & lumsail.en.made-in-china.com
Factory Address: 4/F, No.9Yi, Lane 2, Suide Road,Shanghai,200331,China
){kind=link}