| Customization: | Available |
|---|---|
| Type: | Wellness Center/SPA/Hospital/Salon |
| Application: | Salon, Home, Clinic Use |
|
Still deciding? Get samples of US$ 17999/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Cryo Cryogenic Electrical Cryosauna Full Body Cryotherapy Chamber For Sports Injury Recovery
MODEL NO#BS-CC1/BS-CM1
Are you ready to join the cryorevolution? Buy the most popular cryosauna in the world
Cryotherapy chamber with thermal monitor and oxygen sensor. Cryotherapy chambers based on liquid nitrogen. Using the right equipment for cryotherapy turns the science of exposing the entire human body to ultra-low temperatures for the recovery of the circulatory, nervous and energy systems into an effective healing technology. According to scientific and medical research, the optimal efficiency of whole-body cryotherapy procedures is achieved by placing the body at temperatures up to 120-170 ° C (- 184-280F) for 1-3 minutes, reducing the temperature of the skin surface. Short, extremely cold, non-invasive applied air pulses directed at the human body, elicit physiological reactions that promote treatment and recovery, which are used in many fields, such as cosmetology, sports rehabilitation, and medicine.
CONCEPI OF WHOLE-BODY
CRYOTHERAPY
Cryotherapy Chamber is a technique that involves short exposures to ultra-low temperatures (between -70ºC and -170ºC).The effects of cryotherapy are based on the body response to cooling the upper layer of the skin.The term "cryotherapy" comes from Greek "kryos" meaning "cold"and "therapy" meaning "treatment". During a cryotherapy session, the body surface is cooled for a short period of time.
WHAT A SESSION IS LIKE?
REQUIREMENTS
FOR PREMISES
The area of the room shall not be less than 8m2.
The door frames should be at least 1200 mm wide.
The unit should be located on a flat surface with a slope of no more
than 0.5% (5 mm to 1 m of length).
The distance from the walls to either side of the unit should be at least
500 mm.
Should be at least 2,800mm high.
Grounded electrical sockets.
The room should have a vent in the wall/window with a diameter.
Of 120 mm to exhaust nitrogen vapors outdoors.
Alternatively, vapors can be exhausted into the
ventilation shaft with forced ventilation
provided that it does not go through
residential premises.
Supply and exhaust ventilation
(preferably air conditioning).
Ambient temperature
between + 15 and 24ºC.
Relative humidity
between 30 and 60%.
){kind=link}